Friday, November 3, 2017

How To Do Carpet Repairs Lawrenceville GA

By Paul Jones


When your carpet gets damaged, there is no need to call an expert to carry out repair works because you can do the job with the right advice. Being able to repair your carpet on your own will ensure that the rug serves you for a long time, and it also saves on the cost of repair and replacement. This article will emphasize the procedure for doing carpet repairs Lawrenceville GA.

The first step is that one should measure the exact area that needs repair. The measurements you get will help you in knowing the extent of damage and also the dimensions of repair materials that you will need. It is crucial that you first start by getting the measurements of the damaged area before cutting or buying a replacement patch.

Second, it is vital that one tapes the area that needs repair. Use a duct tape to outline the place to be removed and take the measurements of the same. The measurements obtained should help one to measure the inside edges of the tape and ensure that it matches the dimensions. One should keep a piece in store for repair purposes.

Cut the damaged place by using the various cutting tools. Make sure that your cut follows the measurements you had marked to avoid making mistakes and cutting unnecessary parts. Apply enough pressure to make sure you cut out the damaged place without affecting the other parts.

From the material for repair, you should cut a piece for replacement and ensure that you measure and cut the replacement patch. It is vital for one to use the measurements in place to cut the exact spot to fix the damaged part. To make it effective, one can use a pencil or other marking tools to mark the spot. One should make use of sharp cutting tools to cut the exact shape.

Go ahead and prepare the mat that requires repair. It is essential that the rug is in the correct position so that you will be able to fix the patch smoothly. After having it in the right area take your time to place it in the correct direction so that it does not appear as a replacement.

Ensure that the replaced part is in the right direction to match with the other sections of the carpet. It is vital that one does not glue it until they are okay that the replaced part will match with the other areas. When you are sure that you have the right angle for the patch, you can go ahead and put glue using the previous dimensions. If there are unnecessary parts that you feel are not making the spot look like the mat, you should trim them.

Lastly, after the glue has dried, make the mat smooth to hide any signs that repairs were done. One can use a brush to have the new patch align to the direction of all the original fibers. Also, one can use a vacuum cleaner to vacuum the section to match with the rest.




About the Author:



No comments:

Post a Comment